1. Since our code style dictates that these be `final` methods, we shouldn't be concerned about overlap.
2. There is precedent for `init` methods as requirements before using class instances.
Since we need to maintain backwards compatibility for class constructors we should settle on using method injection instead of constructor injection. I've replaced the `Definition` class we're using with one that doesn't support constructor arguments and added a check for auto_arg addition. Note that we don't check for method existence in the extended container. This is because reflection is unnecessarily expensive and we should avoid it if at all possible.
This bug was introduced in #26260. The sequence is:
1. WC_Query::adjust_posts_count runs, to handle found_posts filter,
this indirectly executes wc_setup_loop.
2. At this point $GLOBALS['wp_query']->max_num_pages hasn't been set
yet, and has a value of 0. Thus the loop variable total_pages
is set to 0.
3. Later wc_setup_loop runs again and this time
$GLOBALS['wp_query']->max_num_pages is already set, but since
the loop variable total_pages already exists, it keeps its
value of 0.
4. The pagination controls never show if total_pages is less than 2.
The fix consists of hooking into the_posts to set the value of
total_pages again, at that point $GLOBALS['wp_query']->max_num_pages
is already set.
PR #26260 introduced a handler for 'found_posts' filter in WC_Query
class in order to adjust the count depending on the visibility
of variation products. However the handler incorrectly assumed
that the filter was triggered only when listing products, when
actually it's also triggered for any post type e.g. pages.
In these cases the post count was set to zero, which caused bugs.
Now the handler starts with the originally supplied posts count,
and only decrements it when a post is a product AND is not visible.
Now, if there are filters present the logic is as follows:
- For multiple filtering values of the same attribute:
the product is visible if there's at least one variation
that has one of the filtering values associated to the attribute,
or if there's at least one variation having the attribute
with a value of "Any".
- For filtering by more than one attribute:
the product is visible if there's at least one variation that
is visible for ALL the attributes according to the above rule.
Note that this is irrespective of the type of logic configured for
the filter (OR or AND).
Two adjustments were needed:
- Adjust the count even when there's no nav filtering in the query.
This is necessary to present the proper products count.
even when the woocommerce_product_is_visible filter is used.
- Account for the case where $GLOBALS['wp_query']->posts
returns objects instead of ids (for example when viewing
a product page).
After the change that registers variation attributes as terms
(in addition to reigstering them as post meta) it is now time
to modify the get_filtered_term_product_counts methods in
WC_Widget_Layered_Nav so that it works consistently for both
variable and non-variable products. The logic for the counters
is now as follows:
with OR operator:
- Simple products: count the attributes of all visible products
(unchanged behavior).
- Variable products: count attributes corresponding to
visible variations.
with AND operator:
- Simple products: count the attributes of visible products but only
for products that have all the selected (unchanged behavior).
- Variable products: find all the products for which all the variations
corresponding to the selected attributes exist and are visible,
then count the attributes corresponding to the visible variations
of those products.
A product is "visible" if it's published, not excluded for catalog,
and has stock. Additionally, a variable product will not be considered
visible if the parent product is not.
Product attributes are currently recorded as terms in
wp_term_relationships (product attributes are actually taxonomies).
In the case of variable products this is true for the main product,
but not for the variations. The attributes used to define variations
are stored as post meta, but nothing is recorded in the term
relationships table.
This is a problem when using the layered nav filtering plugin,
since the attribute counters displayed are calculated based solely
on the contents of the term relationships table. Adding meta queries
would be really messy (especially when the widget is configured
with AND operator) and would probably also hurt performance.
This commit adds a change to store the attributes for variations
as term relationships, additionally to storing them as post meta.
Terms are stored on variation creation, and updated/deleted together
with the variation as appropriate. "Any" variations (stored in meta
as empty values) are not stored as terms.
Additionally, a database upgrade is included in order to backfill
terms for already existing products.
The layered nav filtering doesn't work well with variable products
when some variations have stock and other don't. When a term is
selected in the widget, a variable product having no stock for
the variation corresponding to that term but having stock for
other variations will be displayed, but it shouldn't.
This commit fixes that by introducing two changes:
- A new override of "is_visible" for WC_Product_Variable that
looks at the supplied filters, compares them against the corresponding
available variations and calculates the visibility based on
the query type (OR or AND).
- A hook on the "found_posts" filter in WC_Query, that adjusts
the posts count based on the found products visibility
when there are filters available; this is needed to sync the
"displaying X posts" messages and the paging when variable
products are hidden due to stock status.
Additionally, the visibility calculated in "found_posts" is cached
as loop variables so that it isn't calculated again when actually
displaying the products.
It is possible for a later duplicate webhook to be fired too early if
the same webhook triggers in one request more than once with the updated
changes from the second one missing if it happens too quickly.
This queues all webhook to be register on shutdown instead of just
syncronous ones to make sure all data from the request is updated first
before the webhook gets queued.
test_static_mocks_can_be_used_via_injected_legacy_proxy_and_woocommerce_object
was failing in PHP 7.0, this replacement fixes it.
Suspected cause: https://bugs.php.net/bug.php?id=76505
- src/README.md largely expanded
- tests/README.md expanded
- includes/README.md added
- src/Internal/REAMDE.md added
src/README.md and includes/README.md have TODO placeholders to add
guidelines regarding to actions and filters.
If a class name is passed as a concrete, check that the class
constructor is public if it exists. If another type of concrete is
passed, check that it's valid (a callback or an object).
Also update the autoloader to check if the class file exists,
otherwise class_exists fails if a namespaced class doesn't exist.
The following methods are added and can be invoked using `WC()`,
they just redirect to the same methods in LegacyProxy:
call_function
call_static
get_instance_of
Since we need to load all of these files before WooCommerce has initialized we can't rely on Composer to handle the autoloading. We should take this namespace out of Composer altogether and just have our test autoloader take care of it.
- Method and class renames.
- Removed unnecessary autoloader registration.
- Add a unit test for classes with non-object type hints
in constructor arguments.
- `get_instance_of` accepts now arguments to be passed to the
class constructor if necessary.
- `get_special_instance_of` method removed, instead, now if a method
named `get_instance_of_<lowercased class name>` exists in the class,
it is used to get the instance of the class.
- A couple more unit tests added.
Also:
- Make the methods in `AbstractServiceProvider` protected.
- Add an autoloader for files in the `tests/php/src` directory.
- Fix a bug in the provisional (?) autoloader.
- camelCase methods changed to snake_case for consistency with WP.
- Added a check in `ExtendedContainer::get` that throws an informative
exception if a non-namespaced class name is passed.
- `container->reset_resolved()` is called during unit testing bootstrap.
- Added some utility methods in `WC_Unit_Test_Case`.
- Added a new class `ExtendedContainer` that extends League's container.
- `add` modified to reject classes not in the root Woo namespace.
- Has two new methods, `replace` and `reset_resolved`.
- It's used as the underlying container instead of League's one
in `Container`, but the new methods are not exposed.
- At unit test bootstrap time the globally registered container is
replaced with the extended one that `Container` stores
(grabbed from private property using reflection).
- A new `MockableLegacyProxy` is added. It inherits from `LegacyProxy`
and allows to mock functions, static methods and legacy classes.
- The registeed `LegacyProxy` is replaced with the mockable version
during unit test bootstrap.
- A PHPUnit hook is added to reset the mockable proxy to its initial
state (so that nothing is mocked) before each test.
- `WC_Unit_Test_Case` gets helper methods to mock functions, static
methods and classes without having to retrieve the proxy class.
At some point the 'change_stock' key is assumed to be present
in the request data, but it might not. Fixed to test for existence
before using the value.
The test added checks that stock status of variations when saving
a variable product is changed or not appropriately depending on
the request data supplied.
Claudio Sanches
Ron Rennick
Tam Mullen
Christopher Allford
Néstor Soriano
vedanshujain
dependabot[bot]
Jonathan Sadowski
Christopher Allford
Matt Harrison
Peter Fabian
Tam Mullen
Jeff Stieler
Mike Dent
Julia Amosova
Damir Ha