* register filter wrapper block
* register block variation
* rename the active filters wrapper
* prevent 404 error
* Revert "prevent 404 error"
This reverts commit 8b6cb7c6658b2a5a99b890b67f1dce8c1c51cdbf.
* render parent wrapper block
* support price filter block
* hide the active filter block from inserter
* swap the title of wrapper and inner filter block for active filters
* hide the legacy heading for the price filter
* update block title and description for active filters and price filter
* remove heading control for price filter
* remove heading control for active filters
* update pattern
* try: upgrade button
* limit the number of inner block to 2
* prevent removing the inner filter block
* Revert "prevent removing the inner filter block"
This reverts commit 83b7feed78a7a7f50fd5799d1706faa9f2fc9050.
* convert stock filter to inner block
* refactor block upgrade button to share between filter blocks
* update default heading
* update pattern
* update icon and title
* Fix stock filter error by importing translations package
* Upgrade Active Filters name to Active Filter Controls
* Add upgrade support to price filter
* Convert attribute filter to inner block (https://github.com/woocommerce/woocommerce-blocks/pull/7101)
* wip: convert attribute filter to inner block
* fix: render inner attribute filter block on the front end
* refactor: inner block wrapper, extract the attribute parsing logic into a utility
Co-authored-by: Tom Cafferkey <tjcafferkey@gmail.com>
* Set correct attribute on the new filter blocks when they are upgraded
* Use the Warning component to display the upgrade message so it is consistent with Gutenberg
* address code review
* better detect legacy block to show the upgrade notice
* rename UpgradeToolbarButton to UpgradeNotice
* add upgrade notice to the stock filter block
* rename InnerBlockWrapper to BlockWrapper
* attribute-filter: control wrapper visibility
* passing block attributes down to inner active filters control block
* fix styling of inner attribute filter control block
* passing attribute to inner price filter control block
* passing down the attribute to inner stock filter control block
* remove unneccessary parsing
* use default scope for variations
* fix default attribute values
* use default block appender
* fix: lock control blocks
* remove dynamic title code from attribute filter block
* register active filters as variation and set it to the default that overrides the base block
* fix isActive for default variation
* fix: isActive logic for the active filters block
* register side effect
* fix ts error
* e2e: fix active filters block backend test
* e2e: fix frontend active filters test
* e2e: fix attribute filter test
* e2e: fix price filter test
* e2e: fix stock filter test
* e2e: update fixture
* e2e: fix attribute filter test
* remove invalid test
* e2e: update heading selector for price filter in backend test
* e2e: fixe backend price filter heading test
* fix: patterns i18n
* fix: heading level when upgrading the block
Co-authored-by: Tung Du <dinhtungdu@gmail.com>
* Create Cross-Sells product list
* Show “Read more” button for out-of-stock cross-sells products
* Update assets/js/blocks/cart/inner-blocks/cart-cross-sells-products/block.tsx
Co-authored-by: Thomas Roberts <5656702+opr@users.noreply.github.com>
* Update assets/js/blocks/cart/cart-cross-sells-product-list/index.tsx
Co-authored-by: Thomas Roberts <5656702+opr@users.noreply.github.com>
* Remove obsolete isLoading and placeholderRows
* Fix TS errors
* Rename crossSellsProduct to product
* Fix critical error
* Create 2e2 tests for Cross-Sells block
Co-authored-by: Thomas Roberts <5656702+opr@users.noreply.github.com>
* Enabled __unstableHTML hidden option for HTML rendering within notices.
* Fixed margin-bottom for HTML notice content
* Fixed margin-top for HTML notice content
* Attempt to fix a broken e2e test
* Reverse ordter of filter item name and close btn.
* Update layout & typography styles for block items
* Update chip ui view styles.
Additionally, add editor styles to have the editor match the rendered
frontend.
* Update additional remove button styles.
- Add hover state to remove button on chip layout.
- Update disabled styles to remove button in both layouts (mainly relevant
to the editor view).
* Adjust remove button colors.
Set hover states to shades of grey. Also set chip color and text to
match selected text color of the block.
* Update e2e test to account for new element order.
Since we're moving the remove button in the list view from the last
child node to the first child node, we need to adjust the expected order
of the active filter item text.
* Design and copy updates on the block settings
Co-authored-by: Alba Rincón <albarin@users.noreply.github.com>
Co-authored-by: Alba Rincón <alba.rincon@automattic.com>
* Update Filter by Stock controls and UI to include custom checkbox and settings.
* Include and style Filter by Stock reset button
* Make checkbox accessible via keyboard
* Update snapshot tests for Filter Products by Stock component
* Update E2E tests with new label value
* Update label test for Apply Filters in E2E tests
* Specify checkbox type so styles are not overridden in the editor
* Update E2E test label for filter button
* Update label selector to search for containing text rather than exact match
* Escape quotation marks for label query in E2E shopper tests for Filter by Stock
* Correct typo on Filter by Stock controls
* Replace custom checkbox with CheckboxControl component from the checkout package.
* Remove opacity on product count for checkbox label so its the same color as the label.
* Update snapshot tests with new component usage for filter by stock
* Update block title from Filter Products by Stock to Filter by Stock
* Update reset button behaviour to clear selections immediately regardless of whether the Apply Filters button is active or not.
* Pass option value as ID to satisfy E2E tests
* Update snapshot tests for stock filter
* Reset checked state on reset for when they have filters checked but not applied.
* make toggle control full width
* add inlineInput attribute
* add inlineInput sidebar setting
* add inlineInput help text
* style the filter button
* style price input
* wip: reset button
* clicking on reset button will reset the price query
* support inline input fields
* price text styling update
* fix reset button font size
* add loading placeholder to all elements
* fix filter button style
* update range slider thumb and track style
* fix loading placeholder for non empty query
* move reset button into FilterSubmitButton component
* try: render placeholder serverside
* update filter button label
* Revert "try: render placeholder serverside"
This reverts commit 98f08efdb8048b8f78c7476b774d1128c1d31295.
* remove LoadingPlaceholder component
* remove Price: prefix from the current displayed price range
* update labels
* extract reset button as a dedicated component
* update price text section
* update reset button behavior
* avoid breaking filter submit button style for other filter blocks
* rename block to Filter by Price
* fix e2e test
* remove border support
* adjust padding for elments
* rename panel title
* Make the inline option enabled by default and fix frontend rendering
* Make the `Price Range Selector` uppercase
* Show `Reset` button only when a selection has been made
* Revert the `save` change to avoid the 'Block Recovery Prompt'
Co-authored-by: Alba Rincón <alba.rincon@automattic.com>
* Add default page notice
* show notice all inner blocks
* support flow when page isnt saved
* switch from where we get the current post id
* update lock
* fix types
* Remove old compatibility notices from Cart and Checkout
* Move useCompatibilityNotice to sidebar-compatibility-notice directory
* Remove old CartCheckoutCompatibilityNotice
* Create sidebar compatibility notice hoc
* Add isCartOrCheckoutOrInnerBlock function
* Refactor defaultNotice to use new isCartOrCheckoutOrInnerBlock func
* Remove BlockSettings from checkout edit and export from checkout-shared
* Change so component still renders, it is just hidden with display: none
This is required because when it returns null the component gets skipped from being added to the Slot, then when it does return a component, then it gets rendered at the bottom of the Slot. By ensuring it always renders we can have it at the top all the time.
* Set the priorities of the hoc filters so compat notice renders first
* Make isCartOrCheckoutInnerBlock a hook
* Remove old compatibility notice related tests
* Remove BlockSettings from Cart
* Remove withDefaultNotice hoc
* Include DefaultNotice in compatibility notice
* Remove DefaultNotice from Checkout
* Rename withSidebarCompatibilityNotice to withSidebarNotices
This is because it includes the sidebar compatibility notice and the default notices
* Remove useIsCartOrCheckoutOrInnerBlock hook
* Remove compatibility notice code from tests
* Revert DefaultNotice back to the old one
* Remove unused components
* Remove withBlockSettings HOC and fix TS types
This is an abstraction that is no longer required, we can just include BlockSettings in the Cart and Checkout blocks
* Remove CartCheckoutFeedbackPrompt from BlockSettings
It will be included in sidebar-notices instead
* Fix TS Types in DefaultNotice
* Add BlockSettings to cart and checkout edit
* Editor: Add feedback box to the Cart & Checkout Inner Blocks (https://github.com/woocommerce/woocommerce-blocks/pull/6881)
* Show "Feedback prompt" for all inner blocks
* Fix the "feedback" notice position for these blocks
The "checkout fields", "checkout billing address" and
"checkout shipping address" have the addressFields option which
gets rerendered and placed at the bottom of the inspector controls.
* Tidy up the address-fields hoc
* Use correct block name to check for billing or shipping address
* Revert "Editor: Add feedback box to the Cart & Checkout Inner Blocks (https://github.com/woocommerce/woocommerce-blocks/pull/6881)"
This reverts commit 5f3d6cf15ce08d9c303e62ec3e0d0315ead1281f.
* Add hack to get feedback prompt to render last
* Fix TS errors for context and attributes
* Include CartCheckoutFeedbackPrompt in accountcontrols & addresscontrols
* Do not include feedback prompt if on an address block or contact info
* Remove unused hoc for address fields
Co-authored-by: Nadir Seghir <nadir.seghir@gmail.com>
Co-authored-by: Saad Tarhi <saad.trh@gmail.com>
* wip
* set editor using env var instead
* fix attribute missing issue when watching the test
* wip php templates test
* Add E2E tests for the Filter Products By Price Block woocommerce/woocommerce-blocks#6363
add E2E tests for the Filter Products By Price Block
* Add E2E tests for the Filter Products By Price Block woocommerce/woocommerce-blocks#6363
add E2E tests for the Filter Products By Price Block
* create clickLink util
* Add E2E tests for the Active Filters Block woocommerce/woocommerce-blocks#6377
add E2E tests for the Active Filters Block
* Add E2E tests for the Filter Products By Attribute Block woocommerce/woocommerce-blocks#6322
add E2E tests for the Filter Products By Attribute Block
* Add E2E tests for the Filter Products By Stock Block woocommerce/woocommerce-blocks#6323
add E2E tests for the Filter Products By Stock Block
* improve checks
* improve checks
* improve checks
* remove globals.d.ts file
* replace waitForTimeout
* create clickLint utils
Co-authored-by: Tung Du <dinhtungdu@gmail.com>
* Add E2E tests for the Filter Products By Price Block woocommerce/woocommerce-blocks#6363
add E2E tests for the Filter Products By Price Block
* Add E2E tests for the Filter Products By Attribute Block woocommerce/woocommerce-blocks#6322
add E2E tests for the Filter Products By Attribute Block
* Add E2E tests for the Filter Products By Stock Block woocommerce/woocommerce-blocks#6323
add E2E tests for the Filter Products By Stock Block
* improve checks
* improve checks
* remove globals.d.ts file
* replace waitForTimeout
* Add E2E tests for the Filter Products By Attribute Block woocommerce/woocommerce-blocks#6322
add E2E tests for the Filter Products By Attribute Block
* Add E2E tests for the Filter Products By Stock Block woocommerce/woocommerce-blocks#6323
add E2E tests for the Filter Products By Stock Block
* improve checks
* improve checks
* remove globals.d.ts file
* Add E2E tests for the Filter Products By Attribute Block woocommerce/woocommerce-blocks#6322
add E2E tests for the Filter Products By Attribute Block
* improve checks
* Try to fix account.test.js
* Remove language installations for woo core and wp core and take screenshots
* Upload screenshots to artifacts
* npm install instead of npm ci
* Upload artifacts not matter what
* fsdf
* fsdfsf
* remove screenshoting from account.test.js and only run checkout-terms.test.js
* Print NODE_ENV
* Better handling of overriding wp-env.json
* Run all tests
* Re-enable translations for WP and Woo
* Wait for Cart & Checkout blocks to load before moving on
* Uncomment github actions
* Try to fix shipping test
* fill checkout before placing order, duuuh
* Wait until networkidel0 instead of domcontentloaded for page navigations
* Fix account.test.js
* change visitBlockPage() to use Promise.all()
* Remove screenshot taking
* I think Promise.all() is being funny and not throwing properly, testing
* wait for checkbox to be visible before clicking
* Remove try catch around Promise.all()
* Fix linting issues
* Remove screenshot dir
* Raluca feedback:
* Timeout back to 30000
* Login to merhcant before changing settings
* merchant.logout()
* Transform object for woocommerce_price_filter legacy widget to be replaced with block alternative
* Filter products by price transform
* Price Filter formatting
* Set set_filterable_product_data data on the widgets screen
* Prevent rendering the Price Filter block if there are no products to filter
* Prevent Classic Price Filter Widget from being available as a widget
* Transform layered nav classic widget to attribute filter block
* Allow Filter Products by Stock block to be added as a widget
* Allow Active Filters widget to be transformed to Active Filters block
* Set showFilterButton to true and showInputFields to false in the transform of Price Filter to minic widgets more
* Change displayStyle property to be display_type instead of incorrectly using title
* mock @woocommerce/settings for has_filterable_products setting
* try: add All Products block to render that filter on the front end
* Revert "try: add All Products block to render that filter on the front end"
This reverts commit 5ad09e964b77e5c6499b4134cf58d7a6c226424d.
* try: add all product block to bypass has_filterable_products check
* fix: backend e2e test for attribute filter
Co-authored-by: Tung Du <dinhtungdu@gmail.com>
* Add test to check if T&C and Privacy links are visible
* Fix filling wrong type of form error
With a virtual product we shouldn't need to fill the shipping details
We need to fill the billing instead
* Fix undefined 'termsCheckbox' bug
* Fix terms checkbox name
* Activate test case
* Replace static URL with dynamic one
* Convert external plugin into mock
* Fix JS linting issue
Co-authored-by: Saad Tarhi <saad.trh@gmail.com>
* Cart & Checkout translations test use the already installed language nl_NL
* Extra timeout when checking for shipping and billing addresses
* wait for selector instead of increase timeout
* Change waitForSelector selector:
* Clean up
* Increase idleTime for waitForNetworkRequest
* Fix random timeouts and increase timeout of verifying shipping option
* feedack
* Register missing C & C inner blocks and update fallback template for older C & C versions
This will fix the issues with missing order summary inner blocks: Coupons (both in C & C blocks) and the Cart header. The issue was happening because, for example, for Cart the coupons were registred on the on frontend, but it just wasn't forced in the attributes. Because it also wasn't added to the PHP fallback layout, the render function didn't include it. For the Checkout block the coupons inner block wasn't registered at all.
* Revert changes to Checkout.php, we don't need to test for inner blocks
* Revert "Revert changes to Checkout.php, we don't need to test for inner blocks"
This reverts commit fc39535f8476d02e35353374d9434a8723458cfa.
* Fix the returned template for older Checkout block iterations
* Fix Cart and Checkout templates to accommodate the Summary order inner blocks
* Hide coupon form div from inner blocks if coubons are not enabled
* Fix checkout coupon tests in checkout
They have been written for logged in user
* Fix Order Summary Heading inner block's default text
* Update comments with better wording
* Revert "Hide coupon form div from inner blocks if coubons are not enabled"
This reverts commit ab09021b923fad4218b3016e47760ad07f6bc960.
* rename some things
* Refactor e2e tests
* remove only from checkout test
* Typo in test
* Add --testPathIgnorePatterns performance back into package.json
* Niels feedback and fix a test
* Update import from utils
* Increase timeout of translations test to 30000
* Wait for network idle in goToCart and goToCheckout
* Increase timeout to 30000
* fix E2E tests
* try fix
* test
* test
* test
* another test
* fix test
* 60s timeout
* test
* Update product constants
* Simplify orderSummary check
* Go back to page.$
Co-authored-by: Luigi <gigitux@gmail.com>
* Check for performance file existence before running
* check reports/performance-report.json file exists on setup
Co-authored-by: Alex Florisca <alex.florisca@automattic.com>
* Add performance script to measure load times of cart and checkout blocks
* Temp commit
* Temp commit
* Temp commit
* Remove specific test from performance e2e command
* Add performance reporter
* Add step to clean performance file before running tests
* Add test report constant & average and logPerformanceResult test utils
* Update uses of product name constant
* Add cart coupon performance test
* Check if report file is empty before parsing
* Limit performance tests to only ones in performance directory
* Round the averages and add a linebreak after each entry in the log
* Fix formatting of report and only output after all tests
* Log each loading metric as an individual data point
* Improve formatting
* Get load times in ms from profiler
* Revert changes to fixtures
* Remove trace.json from git
* Remove checkout test file (tests not implemented)
* Check performance log file exists before truncating it
* Fix checkout coupon test
* Remove console logs
* Revert to use virtual products after rename of constant
* Ignore performance tests when running regular e2e tests
* Feedback changes
* Tidy up
* Fix packag-log.json:
Co-authored-by: Alex Florisca <alex.florisca@automattic.com>
* Add "single-use" coupon to the fixture data
* Create a first draft of the coupon e2e test
* Create single use coupon code constant
* Create "applyCouponFromCheckout" function
* Remove the "single-use" coupon from the fixture data
* Setup coupon creation using Woo's Rest API
* Add single-use coupon E2E test
* Move discount XPath definition to the expressions file
* Clean comments
* Remove unnecessary delay function
* Refactor to a more human friendly check
* Clear the setup in the afterAll branch (delete coupon)
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
* Sub/Total/Fee inner blocks
* Row blocks within the inner block
* Update icons
* Resolve stying issues
* Remove old block
* Pin totals row
* Locking logic update
* Heading inner block
* Refactor where inner blocks are defined
* Add todos
* Todo for Consider deprecating OrderMetaSlotFill and DiscountSlotFill in favour of inner block areas.
* Improve frontend registration of components using new entrypoint
* Experiment- external block context
* Revert "Experiment- external block context"
This reverts commit 4b75668ec7eb62f065c6a488cd942a666e26204f.
* Duplicate inner blocks to avoid conflicts with context
* Remove todo
* Rename block dir
* Some test fixes
* Fix import
* fix import
* linting
* Remove unused attributes
* Optional classname
* fix coupons import
* fix shipping mocks
* Styling
* Fix selectors in e2e tests
* Add back the wc-block-components-totals-wrapper class that was used for each segment in the totals Order summary
Because, removing them was:
- a breaking change for the old structure
- was making it harder to target the inner blocks. Before the class was used to target each segment
- it was making the wc-block-components-totals-item behave as a child or parent depending on the inner block, inconsitency
* Reuse the TotalsWrapper component for C& C blocks inner blocks
This component was removed in this PR, but we wrap components in the Cart and Checkout sidebar in a TotalsWrapper. This will ensure consistent spacing and borders are applied to items in the sidebar.
Co-authored-by: Nadir Seghir <nadir.seghir@gmail.com>
Co-authored-by: Raluca Stan <ralucastn@gmail.com>
* Add tests for the Mini Cart Block when it is added on the FSE editor woocommerce/woocommerce-blocks#5727
Add tests for the Mini Cart Block when it is added on the FSE editor
* not hardcoding selectors
* fix typo
* restore old searchForBlock function
* add export
* Revert "restore old searchForBlock function"
This reverts commit 7049ad85bc2752ad33933eec00da9682943ec35a.
* use searchForBlock from package only for FSE pages
* add fix for GB
* Cleanup e2e jest config from moduleFileExtensions
moduleFileExtensions by default support js, ts, tsx etc.
* convert legacy-template-blocks e2e test to TS
* clean up jest.config.json moduleFileExtensions
unnecessary defaults override
* Shopper can have different shipping and billing addresses
* Shopper can have different shipping and billing addresses
* Shopper can have different shipping and billing addresses
* Correct billing field IDs
* Remove unused variable
* Remove unused timeout
* Remove unused commands
* Activate company field using setCheckbox
* Deactivate company field using unsetCheckbox
* Remove obsolete command
* Empty cart before and after each test
* Remove obsolete import
* Check billing and shipping company
* Remove manual code with unsetCheckbox
* Fill company if field exist
* Get checkbox ID from label
* Remove duplicate company field toFill method
Co-authored-by: Saad Tarhi <saad.trh@gmail.com>
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
* upgrade wordpress/scripts to 22.3
* update jest config/setup
* add explicit-exports-references plugin
to handle payment-method-config.tsx spying on external methods
the way code is output now changed and tests like this would not
work anymore as transpilet files were no longer using exports but
local references to methods.
* missing snapshot
* make cart-products E2E test more stable
* surppress eslint error in test file
* fix css stylelint issues
* update eslint-plugin-woocommerce eslint package
* remove temp test:e2e:start script
* re-run
* add stylelint as recommended extension
* remove redundant types (provided by packages now)
* patch update @testing-library/jest-dom
* dry getAllTemplates util
* Improve goToSiteEditor e2e util
It will now properly wait for page to load
and critical parts to be available before
handing control over to the next steps
* adapt site editing tests to new goToSiteEditor API
* try to stabilize the saveTemplate
to early navigation was causing the dreaded
"Expected an Error, but "" was thrown"
* try stabilizing saveTemplate
* contextually group/sort params
* improve clarity of the goToSiteEditor E2E util
- adds goToSiteEditor private helper that hides the temporary need
for handling theme.php and site-editor.php paths
- adds two exported utils goToTemplatesList and goToTemplateEdit
that hide UX details of waiting ofr page to be ready on load including special
case for waitingFor templates list actions to be loaded
* put back page where it belongs ⚡️
* Create "isLoggedIn" shopper function
This function checks if a shopper is logged in
* Add "Can see warnings when form is incomplete" test
* Optimize login check and logout process for the test
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
* Add handling of editor context via GUTENBERG_EDITOR_CONTEXT env var
* Fix flaky tests around editing templates
* Wait for save template response to complete
* Add XPath expressions
* Add "setCartQuantity" utility function
* Add "productIsInCart" utility function
* Add "update product qty" e2e test
* Clean up test file
* Fix test on headless mode
* Add Increase/Decrease qty test cases
* Decrease the query chain for better maintainability
* Rename expression functions/file for more clarity
* Resolve conflict with trunk
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
The internal ID has been kept after a comment by @tjcafferkey. This causes a
bit of inconsistency in the internal code, but it was deemed that it would have
been better as users who have customized templates using this
blocks ID will have saved this in their database, and it would result
in a corrupt block when loaded, and we didn't want to support both IDs at the
moment.
Otherwise, most other references to the legacy template, are now using the word
“classic”.
Co-authored-by: Alba Rincón <alba@albasauatticmbp.home>
* Change atomic blocks to not use custom webpack build paths
we want to always load lazy loaded components from their default paths
to avoid having to handle importing components in different ways for
regular and atomic component packages
* Add footer parts to test themes
The Site Editor is expecting the footer parts to be there or it will try to
load them anyways and throw a 404. It's not breaking, but it's polluting
the console.
* Use REST API to tear down the templates
Previously, we used a util called `trashAllPosts` which navigated to the post UI
and deleted all the posts to tear down any side-effects of template editing tests.
However, with a [recent change](14e20f72b5),
WP Core removed the UI for those and that made our tests meet a 500 error.
Using the REST API should also make everything faster.
* Remove deprecated pupeteer waitFor usage
was still present in attribute-filter.test.js
* Update package-lock.json
* pin package versions
* Unify all atomic blocks to register on php side
* Remove Atomic Blcoks chunk_translation handling from AllBlocks
Before it was responsible for enabling translations for all the atomic blocks
* Add per atomic block chunk_translation registration
* update @wordpress/e2e-test-utils to 6.0.2
* add optional puppeteer
* pin workflows node version to 16.13.2
* upgrade package-lock
* upgrade package-lock
* set react and react-dom as peerDeps
* remove atomic block registration
Co-authored-by: Lucio Giannotta <lucio.giannotta@a8c.com>
Co-authored-by: Luigi <gigitux@gmail.com>
* Refactor e2e tests slightly for better efficiency
* Add "proceedToCheckout" shopper method & refactor code
* Use "beforeEach" in case we add more test cases
I've kept the "afterAll" function to reset any side effects at the end
of this file's tests
* Use "beforeEach" in "checkout-place-order-as-guest" file
* Use BASE_URL in shopper.block.goToBlockPage
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
* Tax is displayed correctly e2e test
* Add extra utils to shopper
* add single e2e test script oin package.json
* Feedback changes from Niels
* Test tax is correct on summary page
* Check if CI test passes
* Longer timeout for tax test
* change timeout in jest config
* increate jest timeout
* Test
* Test
* Test
* setTimeout outside of tests to 120000
* Address raluca's feedback and timeout everywheregaa
* Increase timeout on for search box
* set jest timeout to 120000
* Raluca's suggestions
* Debug
* Increase search timeout to 5000
* Only run Tax e2e tests in CI for quicker debug - REMOVE THIS
* use waitforSelector
* 30s delay for toMatchElement
* Let'shope this works
* Remove toMatchElement
* waitForSelector
* Run debug test only
* Debug tax test
* debug taxes
* shopper using toMatchElement again
* Remove the 30000 timeout delay from toMatchElement
* Run all tests but only once
* Remove tax test
* Revert "Remove tax test"
This reverts commit 7db34120e1e91f4fd26514fdb9525cac2a6066bb.
* Delete the minicart test
* Revert "Revert "Remove tax test""
This reverts commit 31dd654e52f37fcd02ccd25336958248bef495c6.
* Revert "Delete the minicart test"
This reverts commit 5595f0834a975d097a300bc0c7cbf643caa8b764.
* tax test
* block addToCart
* Put back block functions
* Refactor block.addToCart
* mini-cart e2e test uses shopper.block.emptyCart()
* only run shopper tests in CI
* Run frontend and shopper tests and change waitFor -> waitForTimeout
* Run frontend tests in CI
* Run CI e2e tests again
* Skip legacy template blocks
* Skip legacy template test but run all others
* Switch to storefront instead of twentytwentyone after legacy-template-blocks tests finish
* Tidy up
* fix typo
* Fix ESLint issue
Co-authored-by: Saad Tarhi <saad.trh@gmail.com>
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
* Add "goToCheckout" method in "shopper.block"
Instead of using "shopper.goToCheckoutBlock" method, it will much easier
to maintain the following structure "shopper.block.goToCheckout"
* Create a constant for billing details
* Create "fillBillingDetails" shopper method
* Add "placeOrder" method to "shopper"
* Enable "Cash on delivery" payment method for our test
* Update "@woocommerce/e2e-utils" package
Some new useful e2e utility functions weren't avaiable in the previous version
* Add E2E test for "Can place an order as guest"
* Fix mini-cart failing E2E tests
In case this fixwoocommerce/woocommerce-blocks#6006 isn't merged yet, this commit can be used to pass all
E2E tests
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
* Shopper → Cart → Can proceed to checkout
* Refactor the code for E2E testing
Introduce some discussed solution to structure and optimize the code
* Resolve some conflicts with the trunk branch
* Remove method overriding and refactor code
We are trying to avoid overriding exiting E2E Woo's utility functions
Instead we can use our own "shopper.block"
* Use a consistent constant naming convention
Co-authored-by: Saad Tarhi <saad.tarhi@automattic.com>
This PR adds a block-enabled theme with templates for WooCommerce
which is intended to be used when testing the more complex scenarios
such as template fallbacks.
Additionally, since theme-dependent logic seems to be becoming more
and more useful (see woocommerce/woocommerce-blocks#5913), this PR also adds a utility function used to
explicitly declare theme dependencies of a test (`useTheme`).
Said function will activate the theme before running a given suite and then
reactivate the previous theme, as to make sure to not have any side-effects
(such as the ones described in woocommerce/woocommerce-blocks#5913 above).
Closeswoocommerce/woocommerce-blocks#5660
* Ensure screenshots can be attached in jest html report
* Force tests to fail in ci
* Console log for testing
* Console log for testing
* Check on hook failure as well as test failure
* Revert "Force tests to fail in ci"
This reverts commit 6efebd63bba4792214f5b24824fb405cf38b1367.
* Take full page screenshot only when error type is not hook_failure
* Remove console log
Also:
* Refactors the function to add a custom paragraph
* Add front-end test for archive template
* Use WordPress data to guarantee block presence
* Use WordPress data instead of selectors to match blocks
* fix: exclude Mini Cart from the blocks editor
* fix: explicitly register Mini Cart blocks for Site Editor and Widgets
* add check to loading the block on frontend
* add e2e tests for widget area
* improve test title
Co-authored-by: Luigi <gigitux@gmail.com>
* Remove unnecessary setup step and use node v16 in E2E action
* Ensure storefront is active
* Use new checkout fixture
* Try with only checkout test
* Update package.json
* Run all tests, not just checkout
* Add clear and fill input test util
* Add tests for Filter Products by Price
* Add class name to filter products by price block in editor
* Update wp-env
* Fix formatting
* Update lock
* Revert "Update lock"
This reverts commit f4e809e000430eea3972c94fd2aea0a19ba6961b.
* Create product attributes during setup
* Remove product attributes during teardown
* Add attributes in fixture-data
* Add two new products, for attribute testing
* Load attributes into store and apply them to products
* Add class to Filter by Attribute when editing
This is so it can be targeted in E2E tests more easily.
* Add tests for Filter Product by Attribute
* Fix formatting in attribute-filter.test.js
* Add tests for active filters block
* Add doc block for ensuteCleanAttributes
* Update wording of title test in all filter block E2E
* Update test wording to read better
* Update snapshots
* Use pptr-testing-library selectors to click elements
This makes the tests easier to reason with, and lets us take a step back from the implementation details (classnames etc.)
* Add saveOrPublish test util
* Use pptr-testing-library selectors to click elements in attribute filter
* Use pptr-testing-library selectors to click elements in price filter
* Add `puppeteer-testing-library`
* Use puppeteer-testing-library API to look for H6 button
* Use correct argument in jest-puppeteer.dev.config
* Update package.json & package-lock.json
* remove tests for 5.3
* remove snapshots
* Remove ensureCleanAttributes
* Remove puppeteer-testing-library, install missing expect-puppeteer package and update tests
The puppeteer-testing-library, although added by gutenberg is not actively used.
I have removed it and realised that the added functionality can be easily replaced by expect-puppeteer.
This is a package that we specify in the jest configuration but it was not part of our package.json.
The selectors from puppeteer-testing-library have been replaced with .toClick and the utility clearAndFillInput with .toFill
The Filter by Attribute block has been skiped until tests are fixed.
* Add back setupPageSettings to jest setup
* Fix filter by attribute block test
* Fix linting error
Co-authored-by: Raluca Stan <ralucastn@gmail.com>
* Bump dependencies to fix e2e on m1 macs
* Disable welcome guide more reliably - see 3da717b8d0/packages/e2e-test-utils/src/create-new-post.js
* Update selectors and fixture data for cart block
* unused dep
* Remove duplicate block wrapper
* Remove unused jest configuration files
* More robust click in view switcher test
* Revert fixture data change
* Remove withRestApiHydration
* Preload checkout data via setting - server data is required for this block
* Handle cart hydration using createPreloadingMiddleware which removes the need for HOCs
* Rename variable
* Remove withStoreCartApiHydration and timestamp checking
* Empty test file
* move empty cart
* remove Cart and rename Cart i2 to Cart
* graduate blocks
* setup template migration from Cart i1 to Cart i2
* back to js so we have a good diff
* add migration
* fix bug in empty cart template
* add useForceLayout hook to edit
* migrate from old block to new block
* migrate styles
* respect align
* add tests
* Include latest cart line item improvements from cart-i1
* Missing changes from cart-i1
* Line items table should be disabled
* Fix e2e tests for cart i2
* update tests to adapt for inner blocks
* update select to resolveSelect to remove warning checker
* rename test/block to test/index
* move blocks to their own file
* undo rename to keep diff clean
* remove .tsx and update jest config
* Revert "update select to resolveSelect to remove warning checker"
This reverts commit 79d55de30edcfe36bbdfe7506df7a09460824f03.
* revert resolveControl
* Fix empty cart editor E2E test by scrolling to the view switch
* parse attributes for order summary block
* migrate attributes when resaving
* Update documentation
Automatic update after running npm run build:docs
* add align options to filled cart and empty cart
* append instead of replcae
* import style.scss in frontend
Co-authored-by: Mike Jolley <mike.jolley@me.com>
Co-authored-by: Raluca Stan <ralucastn@gmail.com>
* wip: add product on sale test
* test: add fixture for product on sale test
* try: permission
* Revert "try: permission"
This reverts commit f8eb09c0152a567383e93c18f61e91fdadd13c40.
* test: basic e2e test for products by category block
* test: basic e2e test for products by tag block
* add basic test for products by attribute block
* trigger build
* fix: slug
* Add test environment to catch errors
* Add jest-circus and jest-html-reporters
This is so we can log the screenshots and errors that happen during E2E tests.
* Use the jest reporters and jest-circus to run the E2E tests
* Force cart test to break
Revert this!
* Upload jest report artifact when tests fail
* Run artifact upload on failure
* Upload entire report directory to artifact
* Revert "Force cart test to break"
This reverts commit c57f2c5ab1d7b60d8824d854c1cb9a8281a71c4b.
* Update .gitignore and jest.config
* Force cart test to break
* Force cart test to break
* Remove <rootDir> from jest-html-reporter path
This was causing the artefact not to upload.
* Revert "Force cart test to break"
Co-authored-by: Niels Lange <info@nielslange.de>
* Remove i2 from build
* Remove i2 php registration
* Rename old checkout dir
* Rename i2 dir
* Migrate i1 to i2 code
* Register block metadata to fix frontend rendering when migrating to i2
* Register in correct order
* Missing styles
* add register-components to side effectful list
* wrong block class in e2e test
* wp prefix missing on selector
* Fix top level block test
* Reselect labels to work around rerendering
* missing empty cart styles
* Consolodate duplicate styles
* remove init code
* update selectBlockByName
Co-authored-by: Nadir Seghir <nadir.seghir@gmail.com>
* Add back end E2E tests for Filter by Stock
* Add unit/snapshot tests for Filter by stock block
* Refactor Filter by Stock block to load stock statuses in the block body
This is required to make the code easier to test, since the mocked settings were being applied immediately after the block was imported, which didn't give time to let the `allSettings` override take place in the unit tests.
* Add PHP Unit tests for test_custom_stock_counts of ProductQueryFilters
* Remove useMemo from stock filter block
This felt like an overoptimisation, it's very inexpensive to run this every render. The result is less complex code, so it's better this way imo.
* Move initial stock options and the values they are derived from into useState
* Add class name to block in editor
* Remove paypal from fixture data
* Fix scroll hoc tests
* Missing return type in cart causing TS error
* update e2e utils
* Replace searchForBlock method in e2e utils
* Single block update insert block
* Use insertBlockDontWaitForInsertClose
* Fix checkout test
- make tests independent & test also for empty cart case
- make sure the Order summary is expanded with a better selector
* Remove unnecessary localStorage operations from tests
* Go to cart page before removing an item from cart
* Remove logging observing before tests
This removes unnecessary console.log interception. A big part of the logic was done for Puppeteer 1.6.1, but since 3.0.0 message.text() returns string. We allow console.error messages to surface in our tests. Although they don't cause the test to fail it might be a good addition for debugging purposes.
* Wip: fix e2e fe tests
* Test that navigation ends
* Fix waitForNavigation
* comment out failing php test
* click the dom element
* Ensure navigation happens by waiting for it. Test page title.
* remove skip and update docs
* Revert "comment out failing php test"
This reverts commit 7c40e8caf3aa32e35e3b70eb32051251b06e0613.
* Fix USD from merge conflict
* Add missing check for page title
* Try page.waitForFunction for text search
* test to see checkout page title is correct
* test checkout page url on CI
* unde jest config change
* Fix assertion for checkout page
* remove extra localStorage item remove call
Co-authored-by: Mike Jolley <mike.jolley@me.com>
Co-authored-by: Nadir Seghir <nadir.seghir@gmail.com>
* BLOCK SETTINGS: Remove unused constants/settings
* AssetDataRegistry: Helpers to check for settings that exist, and registering page ID/permalinks
* Move checkout and cart block settings to checkout and cart blocktypes
* Move isShippingCalculatorEnabled to cart block
* Remove HAS_DARK_EDITOR_STYLE_SUPPORT and IS_SHIPPING_CALCULATOR_ENABLED in favour of getSetting
* Move displayCartPricesIncludingTax to blocktypes, and implement getSetting
* Move block settings to core settings and blocktypes
* Fix namespace usage
* Move review settings
* move tag settings
* Keep productCount in core data
* Move min and default height
* Improve storePages code
* Move attributes to attribute filter block type
* Move $word_count_type outside of settings array
* Remove unneeded setting in preview data (shippingCostRequiresAddress)
* Move min/max settings dependency from GridLayoutControl to Blocks themselves and use getSettings
* DEFAULT_COLUMNS and ROWS to settings
* Move product columns/rows to block types
* Add grid settings to AllProducts block
* Correct default rows
* correct min rows default
* Move hasDarkEditorStyleSupport
* Move hideOutOfStockItems to block type settings
* Move build settings to inline script dependency
* Pass data through asset api and move restApiRoutes
* Export all core settings as constants
* Remove WORD_COUNT_TYPE from core settings
* Move some other core settings to assets
* Update constants
* Make settings use TypeScript
* Update CURRENT_USER_IS_ADMIN usage
* WORD_COUNT_TYPE
* REST_API_ROUTES
* REVIEW_RATINGS_ENABLED and SHOW_AVATARS
* Remove REVIEW_RATINGS_ENABLED and SHOW_AVATARS constants
* Remove MIN_HEIGHT
* Remove DEFAULT_HEIGHT
* PLACEHOLDER_IMG_SRC
* LIMIT_TAGS
* HAS_PRODUCTS
* HOME_URL
* HAS_TAGS
* COUPONS_ENABLED
* SHIPPING_ENABLED
* TAXES_ENABLED
* DISPLAY_ITEMIZED_TAXES
* SHIPPING_COST_REQUIRES_ADDRESS
* SHIPPING_STATES and SHIPPING_COUNTRIES
* STORE_PAGES
* ALLOWED_COUNTRIES
* ALLOWED_STATES
* SHIPPING_METHODS_EXIST
* PAYMENT_GATEWAY_SORT_ORDER
* CHECKOUT_SHOW_LOGIN_REMINDER
* CHECKOUT_ALLOWS_GUEST and CHECKOUT_ALLOWS_SIGNUP
* ATTRIBUTES
* DISPLAY_CART_PRICES_INCLUDING_TAX
* DISPLAY_CART_PRICES_INCLUDING_TAX
* update build for TS files
* fix build dir
* Move blocks build config params
* Move placeholderImgSrc to core settings
* Move rest api hydration hoc to shared hocs and provide it restApiRoutes directly to avoid asset data registration
* Move wordCountType to abstract block
* Remove WORD_COUNT_TYPE in favour of getSetting
* Move IS_LARGE_CATALOG and PRODUCT_COUNT to abstract block type and use getSetting inline
* Add wcBlocksConfig
* fix tests
* Remove unused $asset_data_registry
* remove console.log
* Move build settings to abstract block
* Trigger build again
* Move hydration back to regular hocs for compatibility with trunk (merge conflict)
* Removed wcSharedHocsConfig
* esc home url
* Update search fixture
* Update search snap
* 40000 timeout
* hasProducts -> productCount
* Product Count is part of blocks config
* update mocks
* Use version comparison to determine if batching is enabled
* Change isWpVersion
* scrollTo button
* Add batch route
* Register batch route
* Allow batching on writable endpoints
* Batch in client
* Batch non-GET requests
* Batching support with typescript defs
* Remove unused hook
* Prevent multiple fragment updates
* Only use batch route if detected
* Correct var name
* Move nonce check to validate_callback so it runs before requests are completed
* remove unused imports
* updateCartFragments function as const
* Add phpunit tests for batching functionality
* Reduce batch delay
* increase timeout
* Update isCartUpdatePostRequest for batch support
* Update Endpoint used in test
* Move nonce check back inline - custom headers are not returned otherwise
* Fix error handling
* Back to 30s
* Update assets/js/middleware/cart-update.ts
Co-authored-by: Thomas Roberts <5656702+opr@users.noreply.github.com>
* whitespace
Co-authored-by: Thomas Roberts <5656702+opr@users.noreply.github.com>
This reverts commit 5b65a02297.
This commit broke cart updates for the cart block (surfaced with changing quantity)
There were also legit e2e test fails for the cart-update middleware behaviour that weren’t addressed.
* Add batch route
* Register batch route
* Allow batching on writable endpoints
* Batch in client
* Batch non-GET requests
* Batching support with typescript defs
* Remove unused hook
* Prevent multiple fragment updates
* Only use batch route if detected
* Correct var name
* Move nonce check to validate_callback so it runs before requests are completed
* remove unused imports
* updateCartFragments function as const
* Add phpunit tests for batching functionality
* Reduce batch delay
* increase timeout
* Remove unused fixtures
* Update package-lock.json
* Update product-search fixture and snapshot
* Ensure the product is selected before continuing with the test.
This clicks the test at least once, or at most thrice to ensure it is checked before trying to evaluate the rest of the test.
* Revert "Remove unused fixtures"
This reverts commit e4a4e11b72c6723341d60391bd9cb9cc4197efaf.
* Look for button with aria-label: 'Toggle block inserter'
* Revert "Look for button with aria-label: 'Toggle block inserter'"
This reverts commit a25ea8d9abafead372ef24b2feb92ff58bd95cea.
* Update @wordpress/e2e-test-utils to 5.1.2
* Check for existence of add block button
* Add initial e2e tests to Checkout block frontend
* Fix comment format
* Scroll to payment methods before checking if they are clickable
* Typos
* Implement caching in getBlockPagePermalink to improve e2e test performance
* Revert "Typos"
This reverts commit 1b544276056084f73d5bcdfa391d5438590e4782.
* Simplify product price definitions
* Move scrollTo function to utils
* Add cartUpdate middleware
* Include timestamp for when cart data was generated
* Add getCartFromApi action
* Check whether cart can be hydrated or needs to be fetched from API
* Add cartDataIsStale action and remove getCartFromApi action
* Add isCartDataStale selector
* Don't load cart until staleness check is complete
* Add comment to ease worry about locaStorage execution
* Correct doc block and fix typographical error
* Cater for lastCartUpdate or the timestamp being undefined
* Include @woocommerce/api and @woocommerce/e2e-utils
* Add getNormalPagePermalink test utility
This will allow us to get the permalink of a "normal" page, i.e. one that is not using the block editor.
* Add getBlockPagePermalink test utility
This will get the permalink for a page using the Block editor.
* Emit action to update cart staleness in all execution paths
* Add visitPostOfType function
This will allow us to visit the editor page for a post based on its name and post type.
* Add functions to get permalinks from editor pages
* Add front-end tests for cart
* Update package-lock.json
* Create local function to ensure the page permalink is visible
* Change functions for getting permalinks
They were often failing for unknown reasons, these _somehow_ make them more stable.
* Add logging for GitHub actions
* Add more logging for tests
* Add more logging for tests
* Add more logging for tests
* Wait for networkidle on back
* Remove logging except timestamp
* Wait for timestamp to be added to localStorage
* Split tests to make runs slightly shorter
* Wait for add to cart request before continuing test
* Fix formatting in cart.test.js
* Rename cartDataStale to setIsCartDataStale
* Create constant for localStorage timestamp name
* Rename cartDataIsStale to isCartDataStale
This is for consistency, the action to change this is called setIsCartDataStale - I think this reads better.
* Use cleaner logic when determining if the cart should render or fetch
* Change docblock for isCartDataStale selector
* Remove boolean cast from SET_IS_CART_DATA_STALE reducer
* Set longer timeouts for frontend cart tests
* Enclose cart staleness checks in condition/prevent unnecessary execution
* Remove unnecessary boolean cast from selector
* Use constant for local storage key in tests
* Use new localstorage key in tests. cant access constants in page context
* Create end-to-end-tests.yml for E2E testing action
* Change actions to run on push instead of PR
* Install libstdc++-4.9-dev on E2E tests action
* Add correct apt repository for libstc++
* Reconfigure apt-get commands for installing libstdc++
* Remove accidental inclusion of Travis config from E2E tests action
* Install libkrb5-dev as part of e2e test action
* Run apt commands as sudo
* Install gutenberg plugin and e2e testutils
* Add environment variables to E2E tests
* Rename action and add further config for composer and wp-env
* Rename workflow
* Add jobs for WP 5.6, 5.5, and 5.4
* Fix YML indentation
* Apply 767 permissions to wp-env directory
* Run chmod as sudo
* Comment 5.6 and 5.6 with GB out to test 5.4 more easily
* Remove WP install job, since it should run on each step
* Change order of wp-env start and chmod
* Reorder commands for 5.4 job
* Try running 5.4 tests in isolation
* Reenable tests for all WP versions
* Move commands out of bash script into a series of commands
* Fix indentation on 5.5 job
* Re-enable libkrb5-dev install
* Clean wp-env before each run & upgrade wp-env to 3.0.0
* Update lock file for wp-env@3.0.0
* Reorder wp-env start and clean commands
* Reorder wp-env permissions commands
* Reorder wp-env permissions setup for all jobs
* Reorder wp-env permissions setup for 5.5 and 5.4
* Ensure correct order for env setup and flush permalinks twice
* Update jest snapshots
* Remove rewrite flush command from yml
* Remove npm build from every step and try it just at the start
* Set correct e2e build script
* Add jobs for PHP 8
* Specify PHP 8 minor version
* Run PHP 8 jobs first
* Remove PHP 8 jobs
* Add JS Unit tests job
* Remove js-unit-tests.js workflow
* Remove composer install from every step, add it to its own step
* Cache composer files
* Bust npm cache to test nodegit
* Rename npm cache
* Renove npm cache entirely
* Revert "Renove npm cache entirely"
This reverts commit d6fac6a6ebd9162e48f64daaa8c971320756579e.
* Rename npm cache back to how it was
* Fix yml indentation
* Remove echo from composer cache step
* Revert back to composer example
* Add PHP Unit tests to workflow
* Add PHP Unit tests to workflow
* Rename E2E tests workflow and file
* deliberately break e2e and unit tests to test workflow 👺
* fix php test, should see e2e fail
* revert broken e2e test
* Change steps into jobs, rename workflow
* Remove Travis workflow file
* Add all necessary setup steps to each job
* Rename Setup job and remove dependency
* Add individual jobs for each E2E test environment
* Add npm install and build to setup job
* YML syntax fix
* Remove error-causing chmod
* Rename blocks.ini setup step
Fixes a typographical error.
* Get the latest stable version of WooCommerce for PHPUnit testing
* Add PHP8.0 and PHP5.6 Unit tests
* Run composer update for PHP 5.6 and PHP 8.0
* Revert "Run composer update for PHP 5.6 and PHP 8.0"
This reverts commit 4f90522d0b52b7a8b9e896e9c783795be9dc5399.
* Revert "Add PHP8.0 and PHP5.6 Unit tests"
This reverts commit 66e317dec4af6e3a2ac6f78b6efd050e7fc5aa8e.
Co-authored-by: Rua Haszard <rua.haszard@automattic.com>
* Remove custom fieldconfig for shipping calculator so required fields for shipping are collected
* If the store config requires an address before shipping, do not return rates or totals
Totals, calculated by the cart, would be set to 0 in this scenario which could lead to customer confusion (why is the rate $10 but shipping shown as $0?)
* The shipping total row is missing a border
* Revert "If the store config requires an address before shipping, do not return rates or totals"
This reverts commit f3a4f24f5785392eb43bfc69a5548d398c47d8bb.
* Add hasCalculatedShipping to schema and hooks
* Show shipping notices with updated wording based on if shipping has calculated yet or not
* Refactor shipping row display to use new API props
* Remove block level isShippingCostHidden
* fix test
* Correct the math in the shipping preview in cart
* Document null
* Remove test—this option no longer exists
* Remove unused settings/constants
* Add several tests to Checkout block in the editor
* Avoid 'visibility' word for toToggleElement rule
* Refactor matchers so they receives the label instead of the text
* Make initial 'isRequired' optional
* Refactor code that produces two clicks to DRY
* Unify error messages
* convert eslint config to use @woocommerce/eslint-plugin
- removes unnecessary dependencies
- adds e2e-tests/specs to eslint ignore (they are automatically generated)
- turns off rules that will be handled in subsequent pulls (to avoid a mammoth changeset for review).
- NOTE: prettier config needs left in because of a bug with the existing version of `@wordpress/eslint-plugin` pulled in (fixed in https://github.com/WordPress/gutenberg/pull/25068) so I left the file for now.
* prettier fixes.
* remove obsolete plugin and fixes for eslint update
This branch brings an update to eslint which also changes some syntax with plugins. So this commit:
- fixes featuer-flag plugin syntax.
- removed obsolete dependency-group plugin (which is now in the `@woocommerce/eslint-plugin` configuration.
* add to-do comment
* fixes for test runs
- this also converts our e2e test scripts to use `wp-script test:e2e`, an advantage of this is it will load CHROMIUM on demand for the e2e test run.
* fixes for test runs
- this also converts our e2e test scripts to use `wp-script test:e2e`, an advantage of this is it will load CHROMIUM on demand for the e2e test run.
* include prettier alias as a dependency
This has to be done because prettier is installed with storybook and thus the alias setup in `@wordpress/scripts` is over-ridden by the storybook import.
* another attempt at e2e-test-fix
* add some debugging and temporarily just add one e2e config test for travis
* more debugging
* try installing full puppeteer and see if fixes
* fix package-lock?
* setupSettings separately from other fixture loading
* add debugging of files
* add another console.log (hopefully trigger travis)
* split out blockPage creation to it’s own as well
* fixed! remove debugging and re-enable travis configs for entire test suite
* fix config and rename e2e-tests to e2e
- fixes the failing product-search test
- tests/e2e-tests was redundant, I changed to `tests/e2e` (this follows a file pattern change made in woocommerce core as well).
* add todo for some eslint properties
* remove unnecessary early function execution
* revert earlier commit and remove duplicate call to createBlockPages
Tung Du
Luigi Teschio
Tom Cafferkey
Niels Lange
Paulo Arromba
Daniel W. Robert
Tomasz Tunik
Alba Rincón
Thomas Roberts
Brian
Michael P. Pfeiffer
Seghir Nadir
Tarun Vijwani
Alex Florisca
Raluca Stan
Saad Tarhi
Mike Jolley
Lucio Giannotta
Albert Juhé Lluveras
Raluca Stan
Darren Ethier
Bartosz Budzanowski
Remi Corson