* fix dependencies
* refactor stripe payment-request to extract things into smaller units
- adds/fixes typedefs
- fixes dependencies
- improves logic.
* implement memoizing for functions.
* if same shipping address is selected, just call updateWith immediately
* add separate handler for failed shipping rate retrieval
* improve logic around shipping rate fail/success status
* add notice suppression logic to store notices.
- this is implemented in checkout processor to suppress notices when express payment methods are active.
* add error detection for shipping address errors and update the shipping status accordingly
* update type-def
* set billingData before shippingData
This is needed because of the shipping data and billing data sync logic in use-checkout-address.
* have to tighten dependencies to prevent unnecessary firing
With us now adding error status setters for shippping, the potential for the shipping status changes to trigger the effect went up. So tightening the dependencies to only the stati we care about prevent unnecessary effect calls.
* refactor event handlers to be named and remove all listeners.
This is an undocumented api on the stripe `paymentRequest.on` return value, but I’m trusting it will be relatively stable for this api.
The need for this is caused by the fact that without it, the listeners are re-registered on the paymentRequest event everytime the paymentRequest modal is closed and reopened.
* fix typo in doc block
* Refactor usePaymentMethodRegistration so initialisation happens at same point as dispatch
* Update NoPaymentMethods conditonal
* Suggested changes to payment init
* always default "save my card for next time" checkbox to unchecked:
This is based on the previous checkout behaviour.
I.e. the shopper has to actively opt-in to save their card.
* Implement "save payment method for next purchase" in checkout:
- send "save card" option using existing post key
- wc-stripe-new-payment-method
- comment out inappropriate use of "save" when using a saved card (tbc)
* don't hard code the payment gateway name in 'save payment method' key
* refactor "save payment info" checkbox so payment methods can opt-in:
- Add options.allowSavePaymentToken to payment method
registration / config.
- Opt-in in Stripe CC, it allows saved cards.
- Remove render of "save my card" checkbox from Stripe CC UI component.
- Render "save my card" checkbox automatically in payment method tab
(based on allowSavePaymentToken option).
+ todo/follow up comments
* rejig "save my payment method" behaviour so it's generic:
- Any payment method that supports "save" can opt-in:
- options.allowSavePaymentToken = true/false
- handle `wc-XXX-new-payment-method` key server side to persist
- Add support in payment context/state reducer for storing checkbox
state, expose value and action via context
- Convert state flag to appropriate API key/value in payment processor
- Remove previous stripe-specific implementation
+ bonus add comment to payment context about preserving state in
PRISTINE action
* rename payment method "allow save" option, more consistent with UI
* remove last vestiges of gateway-specific "save card" impl:
- No need to pass CheckboxControl to payment methods; checkbox is
now handled automatically by checkout.
- Remove shouldSavePayment prop passing through various layers of
stripe payment processing code. (Now handled in context/processor.)
* change new option property name and shape. Also adds validation.
* update type-defs
* use more reliable `activePaymentMethod` for saved payment method
Co-authored-by: Darren Ethier <darren@roughsmootheng.in>
* fix arguments
* only set payment status to pristine if it isn’t already successful
* add server side handling for saved tokens
* ensure correct gateway is selected when using saved card:
- reset the active payment method when user selects saved payment method
(card); this ensures that the correct gateway is used when switching
from another gateway to a saved card
* enhance radiocontrol to receive option specific change events.
* implement specific option change events
This commit:
- ensures selecting a saved payment option updates active payment method for the selected option.
- Sets the saved token key for the selected option correctly.
* remove unnecessary php side code
* fix bug with default saved payment option not applying:
When the payment options are initialised, we now call the onChange
handler for the default (`is_default`) option. This triggers payment
success() so checkout succeeds with default payment method, even if user
doesn't touch payment options.
* fix effect dependencies
Co-authored-by: Rua Haszard <rua.haszard@automattic.com>
* add typedefs for store notice context
* improve useStoreNotices hook so returned interfaces are fairly constant
* fix dependencies, defaults, and add types
* fix dependencies
* fix dependencies
* improve functions exposed on validation context so they are more constant
* fixing dependencies
* normalize tokenId to string everywhere
Assuming the token is a number is a bad idea because it is feasible that source for some payment methods could be a string. Also when retrieved as an input value, the id will be a string anyways.
* refactor to move payment processing into it’s own effect
- this is the first step in trying to improve the createSource behaviour.
* memoize setValidationErrors so onPaymentProcessing event effect doesn’t re-run unnecessarily.
* Update assets/js/payment-method-extensions/payment-methods/stripe/credit-card/use-payment-processing.js
Co-authored-by: Albert Juhé Lluveras <contact@albertjuhe.com>
* fix docs alignment
Co-authored-by: Albert Juhé Lluveras <contact@albertjuhe.com>
* Update notices to say `card` instead of `card's`
* Track isEmpty per field so placeholders are not visible when focusing and defocusing other fields
* Make payment notices non-dissmissable, and removed on payment method switch
* Don't add validation notices
* implement nullish coalescing operator
Co-authored-by: Darren Ethier <darren@roughsmootheng.in>
* Remove unused shippingAsBilling prop from billing data context
* Move functions out of component and add docblocks
* Local address state
* Refactor into new custom hook
* Remove TODO and code fixed in core
* useShallowEqual to prevent updates on all field changes
* Fix stale validation errors
* cleanup
* Should be setting local state not global state for email and phone
* Combine useEffects and pass correct deps
* Update assets/js/base/hooks/checkout/use-checkout-address.js
Co-authored-by: Seghir Nadir <nadir.seghir@gmail.com>
* Prettier
* Move validation update check into updateValidationError
* Fix state updaters
* Fix context definition for setShippingAddress
* Fix validation updates
* errorId dep
* Reapply changes to checkout block
* Update equality checks
Co-authored-by: Seghir Nadir <nadir.seghir@gmail.com>
With these changes:
- If an observer returns an object wthout a type property an error is thrown and the emitter is aborted with an error type response.
- For anything else returned from an observer, it’s discarded.
Tests are updated for the new expectations
* Move validation calls to checkout API class
* Validate before payment
* Support additional error data
* Add coupon validation before payment, and hide hashes from user
* Implement validation and recalculation
* Abstract notice handler and implement legacy filters
* Handle generic cart item errors
* strip tags from coupon error messages woocommerce/woocommerce-blocks#2212
* Ensure item errors are surfaced when coupons are removed
* Fix wrong value passed to hook
* fix broken checkout when no payment method is there
* try fixing unit test errors
* if preview data has a receiveCart function use it, otherwise default to an anononymous function
* fix tests
Co-authored-by: Seghir Nadir <nadir.seghir@gmail.com>
Co-authored-by: Darren Ethier <darren@roughsmootheng.in>
* Convert woo notices into exceptions when processing legacy payments
* Prevent console errors when a message is not returned in the response
* include top level message property to capture REST error messages
* include capturing rest error messages on afterProcessing action
* clear notices before exception
Co-authored-by: Darren Ethier <darren@roughsmootheng.in>
* fix broken validation error handling after submit
* Add handling for when there are no observers for payment processing or all observers just return true.
* cheque no longer needs to hook into event emitter
* account for no data on complete status handling in reducer
* add handling for either no observers or all observers returning true for onAfterProcessingWithSuccess emitter
* Handle errors when loading payment methods
* Use an error boundary
* Fix missing initial state in block error boundary
* Cleanup
* Only show internal user messages if it's admin or in editor
* Fixes
* Add friendly error message
* factor out editor preview data for saved payment methods to previews
* add missing imports lost in rebase
* use editorcontext to provide preview data to payment method context
* remove unused `activePaymentMethod` prop in CheckoutProvider and PaymentMethodDataProvider
* don't set the preview saved card as the default
* fix js error with cart in editor - fix EditorContext, pass previewData:
- editor context preview prop has changed;
- update cart to pass { previewCart } in previewData prop
- correctly destructure cart from previewData in useStoreCart hook
- correct typedefs
- EditorProvider props.previewData - now just Object
- similar for EditorDataContext
- correct default for activePaymentMethod state - empty string as before
* preselect 'use a new payment method' in checkout block editor preview
* update unit tests for changes to editor context
* remove stripe.js registration because it is lazy loaded via the library used.
* refactor payment method registration to preserve registration order.
* register payment method asset handles as dependency on editor script as well.
* initial mapping out of stripe payment intents
* rename checkout processing statuses to be clearer
* Add new status and refactor checkout complete behaviour.
* Make sure payment result data is included in checkout processing response
* add payment intent handling
Still testing
* make sure promise is returned
* include site url with endpoint
* modify setComplete status to optionally receive redirectUrl for changing in state at the same time as setting status
* fix typo in property retrieval
* add error handling for after checkout processing event
* add notices area for payment methods
* implement error handling for stripe intents
* hook into stripe error processing and include error in payment response
* clear notices so they don’t show in block and merge payment details
* add notice handling to payment context
* modify error processing in checkout processor
* handle errors with fallback in checkout state context
* hook into after processing for stripe cc error handling
* set checkout to idle status if before processing emitters result in error
* Add emit response type-defs and normalize expectations for observer responses
* improve doc block
* switch checkoutIsComplete check to checkoutAfterProcessing for payment complete status change
* remove unneeded event emitters and consolidate some logic
* fix idle status set logic
* remove logic server side for getting payment method from paymentdata
* ensure stripe accounts for payment request type payment methods
* make sure legacy payment method handling always runs last
* add processedPaymentMethodId to payment method data context state
* switch checkout processor to use new processedPaymentMethod id for submission
* implement returning paymentMethodId from payment-request-express
* include paymentMethodId in stripe cc success return value
* include paymentMethodId in cheque success return value
* add active payment method setting and handling via checkout
express payment methods still need to implement:
- onClick when their button is clicked
- onClose when the express payment interface is closed (cancelled etc).
* don’t expose setActivePaymentMethod on the payment method interface
* remove/fix artifacts from earlier iterations of the pull
* rename `id` property to `name` property for payment method registration
* Revert "include paymentMethodId in cheque success return value"
This reverts commit fe4ee8aced6d67bbd9033263ce61844349d18250.
* Revert "include paymentMethodId in stripe cc success return value"
This reverts commit 359a1f0089866110ec204182f8ffa14ab099c425.
* Revert "implement returning paymentMethodId from payment-request-express"
This reverts commit 117c68980b0876dee0acc78cec7754ccfe2a9bb1.
* Revert "switch checkout processor to use new processedPaymentMethod id for submission"
This reverts commit c38a05b63626dfc1336c7bb0e86417b798a803d6.
* Revert "add processedPaymentMethodId to payment method data context state"
This reverts commit 3d7923e7297f3c76efde536d26eaf68464ba9583.
* improve isSuccess response check and variable name
* implement paymentMethodId config option
* doh php ain’t javascript
* add missing dependency from rebase
* use cart data to provide country and currency_code
* remove files that likely got added back in from a bad rebase.
* modify canMakePayment config property so it must be a function
* Feed cart data to registered payment methods `canMakePayment` function.
This can then be used by payment methods for determining whether to show the payment method or not.
* implement new canMakePayment signature for cheque
Now canMakePayment doesn’t need to be a promise (payment method registry will handle wrapping all values in a promise to treat them as promises.
* implement canMakePayment as a function
* add logic allowing payment method to be overridden via payment data in request
* hook in to trigger server side processing of stripe payment request
* improvements to shipping data context
- memoize event emitters
- split up emitted events (reduces how often events trigger)
- Include whether rate is being selected in exported data.
* expose `isSelectingRate` value to payment method interface
* fix typo in shipping emitters for emitter type
* include setting of shipping data in payment method success status call
- this also requires changing the nested order of providers in checkout provider
* fix priority logic for event emitters.
- lower priority is supposed to fire before higher priority.
* normalize postal code for comparisons
* move normalize functions into stripe-utils folder
* refactor stripePromise so that it provides a specific instance to each payment method.
This also provides it as a prop to the pm components.
* renadme apple pay express to payment request express
This adds full support for the stripe payment request api instead of just applePay (so GooglePay, MicrosoftPay and ApplePay are now supported).
Also adds numerous fixes to internal logic.
* add handling to skip core checkout validation logic if express payment method is handling payment
Express payment methods have their own internal validation so this removes the need for checkout validating fields. This is also necessary because checkout validation breaks the flow when making a payment using express payment methods because of the order of the flow for these methods.
* splitting out emmitter effects for checkout and improving logic
Splitting up effects limits the potential for firing off emitters more than needed.
* remove unnecessary ref definitions
* fix on cancel action erroring for payment request modal
* ensure unique stripe object for component and canPay
* set default total label if one isn’t configured on the server
* fix order of state changes
* simplify condition
* remove unnecessary dependency
* normalize to uppercase too
* simplify can make payment conditional
* update comment blocks
* remove calculating as a checkout status (making it separate)
* include checkout is calculating for determining whether to flip payment status to process
* only change payment method state for status changes if needed
* fix reducer for shipping state
* include checkoutIsCalculating for determining whether to show validation errors in checkout block
* change where currentStatus is defined
* fix bug with saved payment method option
* Counting helpers for shipping rates and packages
* Use new helpers
* Make shipping calculator use shipping context directly
* Totals should use current address
* Avoid useShippingRates
* Return rates and other items from useShippingRatse in useStoreCart instead
* Update tests
* Merge conflict
* Merge conflict
* move preview to editor data and alias it no nothing in frontend builds
* seperate context and provider
* pass previewData as a prop to provider
* address comments
* Add customer ID to checkout API response
* Add customer ID to checkout context
* Show/hide remember payment checkbox based on checkout context
* Pass via payment interface instead
* Missing commas
* Make validation errors appear
* Make validation errors appear all at once
* Simplify diff
* Expose shippingErrorStatus from shipping context
* Memoize currentErrorStatus
* Pass currentErrorStatus to observers
* Add missing type-def property
* Fix typo in constant name
* Refactor emitEvent so false responses don't return true
* Make onCheckoutProcessing observers return errorMessage and validationErrors properties
* remove usage of paymentstatus dispatcher from apple pay
* add type-def for payment data response objects
* make sure shape of payment data for stripe cc is as server expects
* include payment data in checkout processor request
* fix bug that got reintroduced in rebase
* rename typedef
* Add interface for setting an express payment error notice.
* fix typedefs
* remove usage of paymentstatus dispatcher from stripe cc
* remove usage of paymentstatus dispatcher from apple pay
* remove any existing express payment notice on click
* revert buggy change with abort payment call
- also ensure that completePayment sets applePayProcessing to false
* Allow for priority to be set on event emitters
* Add payment event emitters
* add new actions/status to checkout state context
* implement event emitters in payment data context
* refactor checkout state context to use new actions in event emitters
* refactor checkout processor to handle new event emitters
* fix type-defs for registered payment methods
* register observer for cheque payment method integration
* add inline todo
* fix sort
* fix tests and add test for priority usage in event emitters
* remove todo and just add explanatory comment
* condense sort logic
* lowercase test description
* abstract emitter callback to reduce code
* don’t process passed in errors if it’s undefined
* improve error response expectation for payment processing event observer
* Hook up checkout validation with context
* Make sure hasValidationErrors is up to date in onCheckoutProcessing
* Move validation check inside CheckoutProcessor's processCheckout
* Make sure all checkout form fields have a unique ID
* Don't clear checkout context errors in shipping context
* Move CheckoutProcessor to the top so scrollToTop works
* Do not disable Place Order Button if there are errors
* Split checkValidation and processCheckout in Checkout Provider
* Refactor event emitter to use Maps
* Save payment method errors to validation context
* Show an notice when a payment method has an error
* Make sure JS errors during payment are displayed
* Remove error notice when payment method doesn't return an error anymore
* Make sure payment methods know if shipping and billing addresses are the same
* Make sure checkout is only processed if payment methods didn't fail
* Make sure state input also has an id
* Clear input and select errors on unmount
* Pass id to CountryInput and StateInput
* Fix function name
* Add missing default context values
* Move onCheckoutCompleteError effect to CheckoutBlock
* Remove conditional from shipping setHasError
* Rename and move existing checkout provider to checkout-state provider.
This allows us to re-use the interface exposed on this provider for cart and checkout blocks.
* refactor checkout provider to implement the new checkout state provider.
* Add Cart provider and export
* fix type-defs
* fix editor context provider and ensure all `isEditor` checks come from this provider
* fix type definition
* implement cart provider
* add selecting rate resolution state to the cart store
* expose whether rate is being selected on useSelectShippingRate
* Cleanup and refactor ShippingDataProvider
- remove un-needed component and move shipping rates into context provider
- remove error handling (currently the ui/ux for the checkout should result in no errors and any api errors are non-recoverable).
- Add logic for shipping rate selection into context provider and add event emitters for it.
- increment/decrement checkout calculation counts when shipping rates are being selected.
* dispatch checkout error if there is an error
* disable place order button if checkout is calculating or has error
* update doc block
* fix convention for js comment blocks
* CheckoutProcessing work
add missing memoization and implement useRef strategically
This prevents effects from firing unnecessarily.
Tweak assets registration
Order hydration and checkout/ endpoint updates
Fix error handling
Error handling
* Missing isset in stripe
* Fedeback
* rename draft order ID action
* Todos
* Make Product Price component accessible
* Render checkout form step number before the content instead of after
* Announce changes in the Shipping Rates Control results
* Render product name before product price in the Checkout sidebar
* Verify error element id exists before using it in describedBy
* Avoid reading 'Choose a shipping method' if no shipping methods are available
* Hide product image from screen readers if there is no alt text and make link not focusable
* Move Checkout block buttons below the sidebar
* Simplify selector
* Remove ternary to make code easier to understand
* Fix rebase issue
* Fix step number not visible for payment methods
Mike Jolley
Albert Juhé Lluveras
Darren Ethier
Rua Haszard
Albert Juhé Lluveras
Seghir Nadir