woocommerce/tests/e2e-tests
Jeff Stieler 33e6aee1af
Export all component E2E test util functions. (#25636)
2020-02-11 08:29:48 -08:00
..
config Various improvements to e2e tests 2019-12-06 15:06:48 +00:00
specs Change the setting part before the verification. 2020-02-07 15:28:06 +01:00
utils Export all component E2E test util functions. (#25636) 2020-02-11 08:29:48 -08:00
README.md Merge pull request #25300 from woocommerce/fix/25274-docker-mount-dir 2019-12-26 17:36:14 +05:30

README.md

WooCommerce End to End Tests

Automated end-to-end tests for WooCommerce.

Table of contents

Pre-requisites

Install NodeJS

Install NodeJS on Mac:

brew install node 

Install Docker

Install Docker Desktop if you don't have it installed:

Once installed, you should see Docker Desktop is running message with the green light next to it indicating that everything is working as expected.

Note, that if you install docker through other methods such as homebrew, for example, your steps to set it up will be different. The commands listed in steps below may also vary.

Configuration

Test Environment Configuration

We recommend using Docker for running tests locally in order for the test environment to match the setup on Travis CI (where Docker is also used for running tests). An official WordPress Docker image is used to build the site. Once the site using the WP Docker image is built, the current WooCommerce dev branch is being copied to the plugins folder of that newly built test site. No WooCommerce Docker image is being built or needed.

Environment Variables

During the process of Docker building a container with test site for running tests, site URL is being set. Admin and customer users are also being created in advance with details specified in the docker-compose.yaml file. As a result, there is ./tests/e2e-tests/config/default.json file that contains pre-set variables needed to run the test:

{
  "url": "http://localhost:8084/",
  "users": {
    "admin": {
      "username": "admin",
      "password": "password"
    },
    "customer": {
      "username": "customer",
      "password": "password"
    }
  }
}

If you changed either site URL or one of the users details in the docker-compose.yaml file, you'd need to copy the content of the default.json, paste it to test:e2e.json and edit it further there to match your own setup.

Jest test sequencer

Jest is being used to run e2e tests. By default, jest runs tests ordered by the time it takes to run the test (the test that takes longer to run will be run first, the test that takes less time to run will run last). Jest sequencer introduces tools that can be used to specify the order in which the tests are being run. In our case, they are being run in alphabetical order of the directories where tests are located. This way, tests in the new directory activate-and-setup will run first.

Setup Wizard e2e test (located in activate-and-setup directory) will run before all other tests. This will allow making sure that WooCommerce is activated on the site and for the setup wizard to be completed on a brand new install of WooCommerce.

Running tests

Prep work for running tests

  • Checkout the branch to test and stay on this branch.

  • Run npm install

  • Run composer install --no-dev

  • Run npm run build

  • Run the following command to build the test site using Docker: docker-compose up and watch the site being built. Note that it may take a few minutes the first time you do that. The process is considered completed when the messages letting you know that WordPress was installed, WooCommerce was activated and users created will be displayed:

wordpress-cli_1             | Success: WordPress installed successfully.
wordpress-cli_1             | Plugin 'woocommerce' activated.
wordpress-cli_1             | Success: Activated 1 of 1 plugins.
wordpress-cli_1             | Success: Created user 2.
woocommerce_wordpress-cli_1 exited with code 0
woocommerce_wordpress-cli_1 exited with code 0
  • Open new terminal window and cd to the current branch again.

  • Run the following command to make sure the containers were built and running: docker ps. You should see the 2 following containers:

  • woocommerce_wordpress-woocommerce-dev

  • mariadb:10.4

  • Navigate to http://localhost:8084/. If everything went well, you should be able to access the site.

How to run tests in headless mode

To run e2e tests in headless mode use the following command:

npm run test:e2e

How to run tests in non-headless mode

Tests are being run headless by default. However, sometimes it's useful to observe the browser while running tests. To do so, you can run tests in a non-headless (dev) mode:

npm run test:e2e-dev

The dev mode also enables SlowMo mode. SlowMo slows down Puppeteers operations so we can better see what is happening in the browser. You can adjust the SlowMo value by editing PUPPETEER_SLOWMO variable in ./tests/e2e-tests/config/jest-puppeteer.dev.config.js file. The default PUPPETEER_SLOWMO=50 means test actions will be slowed down by 50 milliseconds.

How to run an individual test

To run an individual test, use the direct path to the spec. For example:

npm run test:e2e ./tests/e2e-tests/specs/wp-admin/wp-admin-product-new.test.js

How to skip tests

To skip the tests, use .only in the relevant test entry to specify the tests that you do want to run.

For example, in order to skip Setup Wizard tests, add .only to the login and activation tests as follows in the setup-wizard.test.js:

it.only( 'Can login', async () => {}
it.only( 'Can make sure WooCommerce is activated. If not, activate it', async () => {}

As a result, when you run setup-wizard.test.js, only the login and activate tests will run. The rest will be skipped. You should see the following in the terminal:

 PASS  tests/e2e-tests/specs/activate-and-setup/setup-wizard.test.js (11.927s)
  Store owner can login and make sure WooCommerce is activated
    ✓ Can login (7189ms)
    ✓ Can make sure WooCommerce is activated. If not, activate it (1187ms)
  Store owner can go through store Setup Wizard
    ○ skipped Can start Setup Wizard
    ○ skipped Can fill out Store setup details
    ○ skipped Can fill out Payment details
    ○ skipped Can fill out Shipping details
    ○ skipped Can fill out Recommended details
    ○ skipped Can skip Activate Jetpack section
    ○ skipped Can finish Setup Wizard - Ready! section
  Store owner can finish initial store setup
    ○ skipped Can enable tax rates and calculations
    ○ skipped Can configure permalink settings

You can also use .skip in the same fashion. For example:

it.skip( 'Can start Setup Wizard', async () => {}

Finally, you can aply both .only and .skip to describe part of the test:

describe.skip( 'Store owner can go through store Setup Wizard', () => {}

Writing tests

We use the following tools to write e2e tests:

  • Puppeteer a Node library which provides a high-level API to control Chrome or Chromium over the DevTools Protocol
  • jest-puppeteer provides all required configuration to run tests using Puppeteer
  • expect-puppeteer assertion library for Puppeteer

Tests are kept in tests/e2e-tests/specs folder.

The following packages are being used to write tests:

  • e2e-test-utils - End-To-End (E2E) test utils for WordPress. You can find the full list of utils here.

Debugging tests

For Puppeteer debugging, follow Google's documentation.

Docker basics

How to stop and restart Docker

  • Press Ctrl+C in the terminal window where the containers are running
  • Stop the container(s) using the following command: docker-compose down
  • Restart the containers using the following command: docker-compose up

How to stop Docker and do a clean restart

Steps below will allow building a brand new site with a clean DB and no data as it was built initially:

  • Press Ctrl+C in the terminal window where the containers are running
  • Stop the container(s) and delete all volumes using the following command: docker-compose down -v
  • Restart the containers using the following command: docker-compose up --build