Merge 2524063031 into 920b2b3909

hardware.md

@@ -2,7 +2,7 @@
 title: Hardware Overview
 description: 
 published: true
-date: 2024-10-21T20:25:06.098Z
+date: 2024-10-22T16:49:26.131Z
 tags: 
 editor: markdown
 dateCreated: 2024-10-21T03:34:51.578Z
@@ -17,12 +17,18 @@ dateCreated: 2024-10-21T03:34:51.578Z
   - Model: DVD-IN
   - Part Number: Indoor_KioskWB
   - Made for Walmart per agreement with Redbox.
+## Indoor (17" Screen)
+  - Model: DVD-IN
+  - Part Number: Indoor_Kiosk17
+  - Manufactured in 2011+ (unconfirmed) with a 17" screen
 ## Outdoor
   - Model: DVD-OT
   - Part Number: Outdoor_Kiosk
-  - Heating/Cooling unit prone to fire, remove before use
+  - Heating/Cooling unit
   	- IceQube IQ2200VS and control panel
+      - Known to cause fires, should be removed before use
     - Stego CR027 Heater
+      - Plenty reliable according to employees
 
 # Computers
 
@@ -45,6 +51,10 @@ dateCreated: 2024-10-21T03:34:51.578Z
   - Intel Pentium G630
   - 2GB DDR3
   - 250GB HDD
+- ThinkCentre M58p USFF (2010)
+  - Intel Pentium E5400
+  - 2GB DDR3
+  - 250GB HDD
   
 ## Premio
 - M2H6V1
@@ -58,7 +68,7 @@ dateCreated: 2024-10-21T03:34:51.578Z
    
  # Components
  ## Touch Screen
- - Kristel Displays (from outdoor kiosk)
+ - Kristel Displays (from outdoor kiosk) 15"
     - Product # 259420
     - Model LCD15-042A
     - LCD Panel Model: UNKNOWN
@@ -68,7 +78,7 @@ dateCreated: 2024-10-21T03:34:51.578Z
     - Model LCD15-027C
     - LCD Panel Model: UNKNOWN
     - Max Resolution: UNKNOWN
- - Kristel Displays (from indoor kiosk)
+ - Kristel Displays (from indoor kiosk) 15"
     - Product # RDBX01570
     - Model LCD15-026D
     - LCD Panel Model: UNKNOWN
@@ -81,6 +91,10 @@ dateCreated: 2024-10-21T03:34:51.578Z
  ![ingenico_iuc285.png](/ingenico_iuc285.png)
 ## Modems
 - Cradlepoint IBR650LPE Netcloud
+- Creadlepoint IBR200
+## Power Distribution Unit
+- APC Line-R 1200VA Automatic Voltage Regulator
+
 ## Boards
 - PCB #DVD-26-000-04
    - SER. Master 7/25/06

hardware/kiosk-removal.html

@@ -2,7 +2,7 @@
 title: Kiosk Removal Tips
 description: 
 published: true
-date: 2024-10-21T16:52:54.211Z
+date: 2024-10-22T04:11:25.496Z
 tags: 
 editor: ckeditor
 dateCreated: 2024-10-21T11:40:57.586Z
@@ -33,7 +33,7 @@ dateCreated: 2024-10-21T11:40:57.586Z
 <p>Most, if not all, outdoor kiosks are connected to power via a custom wired connection to the building's electrics. Some buildings will have external breaker panels nearby for their Redbox. However, not all installations will have this. <strong>Ensure power has been disconnected before cutting any wires or removing the kiosk.</strong></p>
 <p>Some outdoor kiosks are bolted into the ground they were set on. If this is the case, it's possible the original bolts have seized into the ground. This will make removal more difficult without the right tools.&nbsp;</p>
 <p>Other outdoor kiosks are mounted with a retaining rail holding the original nylon feet to the ground. This can be unbolted (14mm) to allow removal of the unit.&nbsp;</p>
-<p>Take proper care to ensure no exposed live wires are left after removing an Outdoor Kiosk. Take all signage and don't leave any hazards behind, such as partially removed bolts embedded in the ground. If any cut bolts are sticking out of the ground, a solution might be using a cut-off disc on a grinder to cut them flush with the ground. Be sure to clear away flammable detritus (leaves, paper, etc.) before using the grinder.</p>
+<p>Take proper care to ensure no exposed live wires are left after removing an Outdoor Kiosk (This can easily be done by keeping power off to the breaker and capping each wire individually utilizing wire nuts at the ends). Take all signage and don't leave any hazards behind, such as partially removed bolts embedded in the ground. If any cut bolts are sticking out of the ground, a solution might be using a cut-off disc on a grinder to cut them flush with the ground. Be sure to clear away flammable detritus (leaves, paper, etc.) before using the grinder.</p>
 <h1>Kiosk-Mounted Accessories</h1>
 <p>Kiosks often have accessories on them, such as signage and promotional devices.</p>
 <h2>Movie Promo Lightbox</h2>
@@ -49,3 +49,6 @@ dateCreated: 2024-10-21T11:40:57.586Z
 <p>Many units outdoors have elaborate signage to draw attention to the kiosks. This may require special equipment to remove.</p>
 <h1>Disc Removal</h1>
 <p>Do not attempt to remove the discs at the store the kiosk is hosted at - this is likely to disrupt the store's customers or employees and could create a problem. Once you're</p>
+<h1>Air Conditioner Removal</h1>
+<p>Do not attempt to remove the A/C Unit at the store the kiosk is hosted at.</p>
+<p>todo: info (will be added 10/23/2024 at approx 2:00 PM EST)</p>

kioskengine/redbox-desktop.html

@@ -2,7 +2,7 @@
 title: Redbox Desktop
 description: 
 published: true
-date: 2024-10-21T16:54:26.270Z
+date: 2024-10-22T11:41:18.004Z
 tags: 
 editor: ckeditor
 dateCreated: 2024-10-21T11:18:56.496Z
@@ -11,6 +11,7 @@ dateCreated: 2024-10-21T11:18:56.496Z
 <p><strong>Redbox Desktop</strong> is an application accessible via a keyboard combination or by pressing the “Control Panel Log In” button from the <a href="/kioskengine/field-maintenance">Field Maintenance Application</a>.&nbsp;</p>
 <p>This is an advanced admin panel containing low level access to the OS, including an Admin command prompt, File Explorer, various hardware and administrative software tools, as well as the ability to stop/start most processes on the machine.</p>
 <h1>Login Process</h1>
+<p>To access the login screen, press <code>CTRL+ALT+ENTER</code>. You can do this from almost anywhere on the kiosk, including when error messages are on screen. You should see “Please wait…” appear before the login screen appears. Note that this will fail if the kiosk is still booting up.</p>
 <p>On machines that are Offline (all kiosks are), the login screen for the desktop (titled “Redbox Control Panel Login” will accept any credentials. No modifications are required.&nbsp;</p>
 <p>This appears to be an intentional backdoor in the software to allow easy maintenance operations on the kiosk, even if the kiosk doesn't have an active connection to Redbox's services.</p>
 <h1>Images</h1>