winamp/Src/nprt_plugin/gecko/1.8/win/include/prerr.h

279 lines
9.4 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef prerr_h___
#define prerr_h___
/*
*
* prerr.h
* This file is automatically generated; please do not edit it.
*/
/* Memory allocation attempt failed */
#define PR_OUT_OF_MEMORY_ERROR (-6000L)
/* Invalid file descriptor */
#define PR_BAD_DESCRIPTOR_ERROR (-5999L)
/* The operation would have blocked */
#define PR_WOULD_BLOCK_ERROR (-5998L)
/* Invalid memory address argument */
#define PR_ACCESS_FAULT_ERROR (-5997L)
/* Invalid function for file type */
#define PR_INVALID_METHOD_ERROR (-5996L)
/* Invalid memory address argument */
#define PR_ILLEGAL_ACCESS_ERROR (-5995L)
/* Some unknown error has occurred */
#define PR_UNKNOWN_ERROR (-5994L)
/* Operation interrupted by another thread */
#define PR_PENDING_INTERRUPT_ERROR (-5993L)
/* function not implemented */
#define PR_NOT_IMPLEMENTED_ERROR (-5992L)
/* I/O function error */
#define PR_IO_ERROR (-5991L)
/* I/O operation timed out */
#define PR_IO_TIMEOUT_ERROR (-5990L)
/* I/O operation on busy file descriptor */
#define PR_IO_PENDING_ERROR (-5989L)
/* The directory could not be opened */
#define PR_DIRECTORY_OPEN_ERROR (-5988L)
/* Invalid function argument */
#define PR_INVALID_ARGUMENT_ERROR (-5987L)
/* Network address not available (in use?) */
#define PR_ADDRESS_NOT_AVAILABLE_ERROR (-5986L)
/* Network address type not supported */
#define PR_ADDRESS_NOT_SUPPORTED_ERROR (-5985L)
/* Already connected */
#define PR_IS_CONNECTED_ERROR (-5984L)
/* Network address is invalid */
#define PR_BAD_ADDRESS_ERROR (-5983L)
/* Local Network address is in use */
#define PR_ADDRESS_IN_USE_ERROR (-5982L)
/* Connection refused by peer */
#define PR_CONNECT_REFUSED_ERROR (-5981L)
/* Network address is presently unreachable */
#define PR_NETWORK_UNREACHABLE_ERROR (-5980L)
/* Connection attempt timed out */
#define PR_CONNECT_TIMEOUT_ERROR (-5979L)
/* Network file descriptor is not connected */
#define PR_NOT_CONNECTED_ERROR (-5978L)
/* Failure to load dynamic library */
#define PR_LOAD_LIBRARY_ERROR (-5977L)
/* Failure to unload dynamic library */
#define PR_UNLOAD_LIBRARY_ERROR (-5976L)
/* Symbol not found in any of the loaded dynamic libraries */
#define PR_FIND_SYMBOL_ERROR (-5975L)
/* Insufficient system resources */
#define PR_INSUFFICIENT_RESOURCES_ERROR (-5974L)
/* A directory lookup on a network address has failed */
#define PR_DIRECTORY_LOOKUP_ERROR (-5973L)
/* Attempt to access a TPD key that is out of range */
#define PR_TPD_RANGE_ERROR (-5972L)
/* Process open FD table is full */
#define PR_PROC_DESC_TABLE_FULL_ERROR (-5971L)
/* System open FD table is full */
#define PR_SYS_DESC_TABLE_FULL_ERROR (-5970L)
/* Network operation attempted on non-network file descriptor */
#define PR_NOT_SOCKET_ERROR (-5969L)
/* TCP-specific function attempted on a non-TCP file descriptor */
#define PR_NOT_TCP_SOCKET_ERROR (-5968L)
/* TCP file descriptor is already bound */
#define PR_SOCKET_ADDRESS_IS_BOUND_ERROR (-5967L)
/* Access Denied */
#define PR_NO_ACCESS_RIGHTS_ERROR (-5966L)
/* The requested operation is not supported by the platform */
#define PR_OPERATION_NOT_SUPPORTED_ERROR (-5965L)
/* The host operating system does not support the protocol requested */
#define PR_PROTOCOL_NOT_SUPPORTED_ERROR (-5964L)
/* Access to the remote file has been severed */
#define PR_REMOTE_FILE_ERROR (-5963L)
/* The value requested is too large to be stored in the data buffer provided */
#define PR_BUFFER_OVERFLOW_ERROR (-5962L)
/* TCP connection reset by peer */
#define PR_CONNECT_RESET_ERROR (-5961L)
/* Unused */
#define PR_RANGE_ERROR (-5960L)
/* The operation would have deadlocked */
#define PR_DEADLOCK_ERROR (-5959L)
/* The file is already locked */
#define PR_FILE_IS_LOCKED_ERROR (-5958L)
/* Write would result in file larger than the system allows */
#define PR_FILE_TOO_BIG_ERROR (-5957L)
/* The device for storing the file is full */
#define PR_NO_DEVICE_SPACE_ERROR (-5956L)
/* Unused */
#define PR_PIPE_ERROR (-5955L)
/* Unused */
#define PR_NO_SEEK_DEVICE_ERROR (-5954L)
/* Cannot perform a normal file operation on a directory */
#define PR_IS_DIRECTORY_ERROR (-5953L)
/* Symbolic link loop */
#define PR_LOOP_ERROR (-5952L)
/* File name is too long */
#define PR_NAME_TOO_LONG_ERROR (-5951L)
/* File not found */
#define PR_FILE_NOT_FOUND_ERROR (-5950L)
/* Cannot perform directory operation on a normal file */
#define PR_NOT_DIRECTORY_ERROR (-5949L)
/* Cannot write to a read-only file system */
#define PR_READ_ONLY_FILESYSTEM_ERROR (-5948L)
/* Cannot delete a directory that is not empty */
#define PR_DIRECTORY_NOT_EMPTY_ERROR (-5947L)
/* Cannot delete or rename a file object while the file system is busy */
#define PR_FILESYSTEM_MOUNTED_ERROR (-5946L)
/* Cannot rename a file to a file system on another device */
#define PR_NOT_SAME_DEVICE_ERROR (-5945L)
/* The directory object in the file system is corrupted */
#define PR_DIRECTORY_CORRUPTED_ERROR (-5944L)
/* Cannot create or rename a filename that already exists */
#define PR_FILE_EXISTS_ERROR (-5943L)
/* Directory is full. No additional filenames may be added */
#define PR_MAX_DIRECTORY_ENTRIES_ERROR (-5942L)
/* The required device was in an invalid state */
#define PR_INVALID_DEVICE_STATE_ERROR (-5941L)
/* The device is locked */
#define PR_DEVICE_IS_LOCKED_ERROR (-5940L)
/* No more entries in the directory */
#define PR_NO_MORE_FILES_ERROR (-5939L)
/* Encountered end of file */
#define PR_END_OF_FILE_ERROR (-5938L)
/* Seek error */
#define PR_FILE_SEEK_ERROR (-5937L)
/* The file is busy */
#define PR_FILE_IS_BUSY_ERROR (-5936L)
/* The I/O operation was aborted */
#define PR_OPERATION_ABORTED_ERROR (-5935L)
/* Operation is still in progress (probably a non-blocking connect) */
#define PR_IN_PROGRESS_ERROR (-5934L)
/* Operation has already been initiated (probably a non-blocking connect) */
#define PR_ALREADY_INITIATED_ERROR (-5933L)
/* The wait group is empty */
#define PR_GROUP_EMPTY_ERROR (-5932L)
/* Object state improper for request */
#define PR_INVALID_STATE_ERROR (-5931L)
/* Network is down */
#define PR_NETWORK_DOWN_ERROR (-5930L)
/* Socket shutdown */
#define PR_SOCKET_SHUTDOWN_ERROR (-5929L)
/* Connection aborted */
#define PR_CONNECT_ABORTED_ERROR (-5928L)
/* Host is unreachable */
#define PR_HOST_UNREACHABLE_ERROR (-5927L)
/* The library is not loaded */
#define PR_LIBRARY_NOT_LOADED_ERROR (-5926L)
/* Placeholder for the end of the list */
#define PR_MAX_ERROR (-5925L)
extern void nspr_InitializePRErrorTable(void);
#define ERROR_TABLE_BASE_nspr (-6000L)
#endif /* prerr_h___ */